Mitsubishi Electric MSZ-AP Split System Prices
Supplied and installed from $2,100 incl. GST. Every capacity priced, with the features and specifications straight from Mitsubishi Electric Australia.
- ARCtick licenceL117206
- Refrigerant tradingAU57185
- Electrical licence146856
- Blue card2591853-1
- Public liability$10M cover
The Mitsubishi Electric MSZ-AP Series is the system we install most often in Brisbane bedrooms and living areas. It pairs a full inverter compressor with Dual Barrier Coating and a Quiet Mode fan setting that drops to 18dB(A) on the 2.5kW model, so it works hard through a humid February without dominating the room.
Every price below is a supplied-and-installed price from Hart Air, including GST, based on a standard back-to-back low-set installation.
Prefer to talk it through? Call 0450 313 517 or request a fixed-price quote.
MSZ-AP price list by capacity
Supplied and installed by Hart Air across Brisbane and the Moreton Bay region.
| Capacity | Typically suits | Replacement (from) | Fresh installation (from) |
|---|---|---|---|
| 2.5kW | Bedroom or study | $2,100 | $2,100 |
| 3.5kW | Large bedroom or small living area | $2,280 | $2,280 |
| 4.2kW | Living area or master suite | $2,500 | $2,500 |
| 5kW | Living or open-plan area | $2,700 | $2,900 |
| 6kW | Open-plan living and dining | $2,900 | $3,100 |
| 7kW | Large open-plan area | $3,200 | $3,400 |
| 8kW | Very large or west-facing space | $3,700 | $3,900 |
All prices are "from" prices, include GST, and are based on a standard back-to-back low-set installation. Site conditions such as extra pipe run, two-storey access, brackets or switchboard upgrades may change the final figure — we confirm everything in writing before we book the job.
Systems from 5kW up show two prices because they usually need a dedicated electrical circuit. A replacement reuses the circuit already feeding your old unit, while a fresh installation includes a licensed electrician running a new dedicated circuit from your switchboard. Compare these figures with the Gree Alto price list or go back to the split system pricing overview.
Key features of the MSZ-AP Series
Taken from Mitsubishi Electric Australia's published product information.
- Quiet Mode and Night Mode
A dedicated Quiet Mode fan setting takes the MSZ-AP25 down to 18dB(A) in heating mode. Night Mode dims the LED display, disables the alert beep and softens the outdoor unit by up to 3dB.
- Dual Barrier Coating
A coating on the internal surfaces reduces the build-up of dust, greasy dirt and airborne contaminants, so the unit stays cleaner for longer and is easier to clean when it is serviced.
- Built-in Wi-Fi control
Operate the system from a smartphone, tablet or online account anywhere you have an internet connection. Availability varies by model — we confirm it for your chosen capacity.
- Full inverter with R32 refrigerant
Fine control of compressor frequency improves comfort and cuts energy use across the heating and cooling range. R32 delivers higher efficiency than R410A with around one third of the global warming potential.
PDF, opens in a new tab.
MSZ-AP specifications
Rated capacities, efficiency and sound levels published by Mitsubishi Electric Australia.
| Model | Cooling capacity | Heating capacity | Stars (cool / heat) | Indoor sound dB(A) | Breaker |
|---|---|---|---|---|---|
| MSZ-AP25 (2.5kW) | 2.5kW (1.1 – 3.6) | 3.2kW (1.3 – 5.0) | 5.5 / 3.0 | 19 – 44 | 10A |
| MSZ-AP35 (3.5kW) | 3.5kW (1.1 – 4.1) | 3.7kW (1.3 – 5.1) | 4.5 / 3.5 | 19 – 45 | 10A |
| MSZ-AP42 (4.2kW) | 4.2kW (0.9 – 4.8) | 5.4kW (1.3 – 6.0) | 4.0 / 2.5 | 26 – 46 | 10A |
| MSZ-AP50 (5.0kW) | 5.0kW (1.4 – 6.2) | 6.0kW (1.4 – 8.0) | 4.0 / 2.5 | 28 – 49 | 16A |
| MSZ-AP60 (6.0kW) | 6.0kW (1.4 – 7.3) | 6.8kW (2.0 – 8.6) | 4.0 / 2.5 | 29 – 48 | 16A |
| MSZ-AP71 (7.1kW) | 7.1kW (2.0 – 8.7) | 8.0kW (2.2 – 9.9) | 3.0 / 2.5 | 30 – 49 | 20A |
| MSZ-AP80 (7.8kW) | 7.8kW (2.0 – 9.2) | 9.0kW (2.2 – 11.0) | 3.0 / 2.5 | 30 – 53 | 20A |
Source: Mitsubishi Electric Australia MSZ-AP Series product specifications. Indoor units measure 299 × 798 × 219mm (2.5 – 5kW) or 325 × 1100 × 257mm (6 – 7.8kW). All models use R32 refrigerant and operate in cooling from -10°C to 46°C ambient.
Built for Brisbane homes
Brisbane's problem is rarely raw heat alone — it is heat plus humidity. The MSZ-AP's full inverter holds a steady low compressor speed once the room is at temperature, which strips moisture out of the air rather than blasting cold and stopping.
The 2.5kW model carries a 5.5 star average cooling rating, so a bedroom system is genuinely cheap to run overnight. Larger models trade some star rating for reach, which is why sizing to the room matters more than buying the biggest unit you can afford.
We handle the full job: installation, servicing and repairs. For a deeper look at this range, read our Mitsubishi Electric AP Series review.
Warranty and what's included
- 5 year Mitsubishi Electric manufacturer warranty
Registered on your behalf when we hand the system over.
- 5 year Hart Air parts and workmanship warranty
Covering all other supplied parts — brackets, pipework, drains, isolators — and our installation work.
- Standard back-to-back low-set installation
Supply, mounting, standard pipe and drain run, electrical connection, commissioning and handover. Extra pipe run, two-storey access, custom brackets or switchboard upgrades are quoted separately and agreed in writing first.
Frequently asked questions
Ready to lock in a price? Call Hart Air on 0450 313 517 or request a quote online.
Request a free quote
Ready to upgrade your home cooling or commercial refrigeration system? Brisbane’s trusted air conditioning and refrigeration team will be in touch the same business day.